Led street light vs Hps street lights

Before Led light come to the market, the high pressure sodium(HPS) lamp is not bad, such as HPS for road lighting has the following advantages and defects:
1. Advantages:

  •  Low color temperature yellow light, rain and fog weather, strong penetrating power.
  • Power can be done relatively large.
  • Small volume, light, strong wind resistance
  •  Lamps with relatively low price.

2. Big shortcomings:

  • Huge energy consumption, bad power efficiency. For example, usually nominal 150W HPS, its overall energy consumption measurement generally more than 217W, the power efficiency is only 66.8%.
  • Very low color rendering index, Ra usually only around 20-30, the light is dark, color rendering ability is bad. It is very bad for road and traffic safety!
  • For high pressure sodium lamp, a dedicated power supply to the lamp power supply to light, Its brightness can not be transient rapid change. At night, in order to save electricity general road lighting can only be taken every two bright a way to reduce power consumption, but the two bright one way will make the pavement shadow zone, rhythmically light phenomenon the eye, to a luminance of the light has a relatively stable adaptability, so the flickering light pattern will have a certain risk, but also can not meet the ” CJJ_45-2006_ city road lighting design standards ” road illumination environment than the requirement of SR.
  • Short service life, high maintenance cost.
  • Light distribution difference, water drop spot effect, make a lot of unnecessary light transmission to the far away from. The ideal spot effect should be for the rectangular beam, and illuminate the road on both sides of a certain range (i.e., the bat wing light distribution curve ). 
  • Large power, high cost of laying lines. Because of large power consumption, therefore the power supply copper wire diameter is relatively thick, LED lamp can use relatively thin copper wire can satisfy the same need. F, other defects.

In order to more clearly see the traditional high pressure sodium lamp and LED lighting difference between, we focused on the two undertook relevant comparison.

Source comparisonprojectHPS- high pressure sodium lampLED road lampNote
Photometric characteristicsbadGoodThe effective light emitted, Led is better than HPS.
Road surface illuminance uniformitybadExcellentLed is better than HPS.
Thermal performancebadExcellentLed  building cooling module design
Electrical propertiesEasy to get an electric shockSafetyLed is more safe than HPS, because Led is working in the low voltage power supply
Service lifeShort (≤ 5000H )Very long(≥50000H)LED solid state lighting, theory of life up to 100000 hours
Working voltage rangeNarrow(±7%)Wide(±20% )Ledr AC input range can even reach 100-264V
Power wastehugesmall
Starting speedVery slowly ( over 10 minutes )rapid ( 2S )LED don’t need preheating
Brightness controlbadExcellentLed can be through the controller and the software realization of differentgray scale brightness
Strobeyes ( AC drive )No ( DC drive )The naked eye can not distinguish in Led.
Light efficiencyLow(<60%)High(>90%)
Color / identificationbad(Ra<40)Good(Ra>75)Led illuminated objectsbright colors, true, which makes people feel comfortable
Color temperatureColor temperature is very low ( ayellow or orange,not comfortable )Excellent
Undesirable glareGlare very strong (dazzling )No bad glare
Light pollutionStrongNoHPS haven’t irradiation place will be forcibly irradiation
emit heathigh(>300℃)Low(<65℃)
Lamp cover easy become dirtyes notLed have anti-static measures
Lamp cover easy become aging and yellowVery soonnot
Seismic performancebadGoodHPS is fragile and easily brokenglass filament, Led without glass and filament
Environmental pollutionLead pollution & mercury pollutionnot
Maintenance costexpensivecheapLed long life
The product volumeLargeSmall
Product weightsimilar
Cost of power supply systemexpensivecheap
Cost performancebadbest
Comprehensive performancebadbest